Tripp Lite HDMI over Cat5/Cat6 Active Extender Reciever Video Audio 1080p - video/audio extender - TAA Compliant
Mfg # B126-1A0-U
CDW # 4001729
Quick tech specs
- Works w/ Tripp Lite’s B126-Series transmitters/receivers to extend HDMI signal via Cat5e/6 cable to multiple monitors in a chain
- Works w/ all operating systems and HDMI sources
- HDMI Cat5 extender/ HDMI Cat6 extender/ HDMI over Cat 5 extender/ HDMI over Cat 6 extender/ HDMI Extender over Cat6/ HDMI extender over Cat5/ HDMI Video/Audio Extender
- Supports HD resolutions up to 1080p(@ 60 Hz)/ stereo audio/HDCP
- Built-in cable includes latching HDMI connector for a more secure connection
Know your gear
The B126-1A0-U HDMI over Cat5/Cat6 Active Extender works with Tripp Lite's B126-002 or B126-004 transmitter to extend an HDMI audio/video signal to an HDMI projector, monitor or television. It's ideal for digital signs, trade shows, presentations, classrooms, churches, retail settings and other applications where the video source is located farther than conventional cables allow.
The receiver's built-in HDMI cable connects to the display. Cat5e/6 cable connects the receiver to the B126-Series transmitter (for best results, use 24 AWG solid-wire Cat5e/6 cable, such as Tripp Lite's N202-Series). Power is supplied by the included USB Micro-B to USB-A cable, which connects between the receiver and a USB port on the display or a USB wall charger.
The B126-1A0-U can extend a 1080p (@ 60 Hz) signal up to 38.1 m (125-ft.) with full, rich stereo. Built-in RJ45 LEDs indicate the units are receiving power and a signal from the source. Built-in equalization control lets you fine-tune the image quality at the display. Easy to set up with no software or drivers to install. Works with all operating systems and HDMI sources.
The receiver's built-in HDMI cable connects to the display. Cat5e/6 cable connects the receiver to the B126-Series transmitter (for best results, use 24 AWG solid-wire Cat5e/6 cable, such as Tripp Lite's N202-Series). Power is supplied by the included USB Micro-B to USB-A cable, which connects between the receiver and a USB port on the display or a USB wall charger.
The B126-1A0-U can extend a 1080p (@ 60 Hz) signal up to 38.1 m (125-ft.) with full, rich stereo. Built-in RJ45 LEDs indicate the units are receiving power and a signal from the source. Built-in equalization control lets you fine-tune the image quality at the display. Easy to set up with no software or drivers to install. Works with all operating systems and HDMI sources.